Search results
Results from the Think 24/7 Content Network
The radio spectrum is the part of the electromagnetic spectrum with frequencies from 3 Hz to 3,000 GHz (3 THz ). Electromagnetic waves in this frequency range, called radio waves, are widely used in modern technology, particularly in telecommunication. To prevent interference between different users, the generation and transmission of radio ...
Pulsed radiofrequency is the technique whereby radio frequency (RF) oscillations are gated at a rate of pulses (cycles) per second (one cycle per second is known as a hertz (Hz)). Radio frequency energies occupy 1.0 × 104 Hz to 3.0 × 1011 Hz of the electromagnetic spectrum. Radio frequency electromagnetic energy is routinely produced by RF ...
Radio frequency ( RF) is the oscillation rate of an alternating electric current or voltage or of a magnetic, electric or electromagnetic field or mechanical system in the frequency [ 1] range from around 20 kHz to around 300 GHz. This is roughly between the upper limit of audio frequencies and the lower limit of infrared frequencies, and also ...
Pulse-repetition frequency (PRF) is the number of times a pulsed activity occurs every second. This is similar to cycle per secondused to describe other types of waveforms. PRF is inversely proportional to time period T{\displaystyle \mathrm {T} }which is the property of a pulsed wave. T=1PRF{\displaystyle \mathrm {T} ={\frac {1}{\text{PRF}}}}
This gives a net polarization that is parallel to the external field. Application of an RF pulse can tip this net polarization vector sideways (with, i.e., a so-called 90° pulse), or even reverse it (with a so-called 180° pulse). The protons will come into phase with the RF pulse and therefore each other. [citation needed]
Adiabatic MRI Pulses. Adiabatic radio frequency (RF) pulses are used in magnetic resonance imaging (MRI) to achieve excitation that is insensitive to spatial inhomogeneities in the excitation field or off-resonances in the sampled object. Nuclear magnetic resonance (NMR) experiments are often performed with surface transceiver coils that have ...
Radio-frequency identification. Radio-frequency identification ( RFID) uses electromagnetic fields to automatically identify and track tags attached to objects. An RFID system consists of a tiny radio transponder called a tag, a radio receiver, and a transmitter. When triggered by an electromagnetic interrogation pulse from a nearby RFID reader ...
The pulse width ( ) (or pulse duration) of the transmitted signal is the time, typically in microseconds, each pulse lasts. If the pulse is not a perfect square wave, the time is typically measured between the 50% power levels of the rising and falling edges of the pulse. The pulse width must be long enough to ensure that the radar emits ...