Think 24/7 Web Search

  1. Ads

    related to: mid range speaker

Search results

  1. Results from the Think 24/7 Content Network
  2. Mid-range speaker - Wikipedia

    en.wikipedia.org/wiki/Mid-range_speaker

    A mid-range speaker is a loudspeaker driver that reproduces sound in the frequency range from 250 to 2000 Hz. [1] Mid-range drivers are usually cone types or, less commonly, dome types, or compression horn drivers. The radiating diaphragm of a cone mid-range unit is a truncated cone, with a voice coil attached at the neck, along with the spider ...

  3. Loudspeaker - Wikipedia

    en.wikipedia.org/wiki/Loudspeaker

    A mid-range speaker is a loudspeaker driver that reproduces a band of frequencies generally between 1–6 kHz, otherwise known as the mid frequencies (between the woofer and tweeter). Mid-range driver diaphragms can be made of paper or composite materials and can be direct radiation drivers (rather like smaller woofers) or they can be ...

  4. Full-range speaker - Wikipedia

    en.wikipedia.org/wiki/Full-range_speaker

    A full-range loudspeaker drive unit is defined as a driver which reproduces as much of the audible frequency range as possible, within the limitations imposed by the physical constraints of a specific design. The frequency range of these drivers is maximized through the use of a whizzer cone and other means. Most single driver systems, such as ...

  5. Horn loudspeaker - Wikipedia

    en.wikipedia.org/wiki/Horn_loudspeaker

    Horn loudspeaker. A midrange horn driver used in a home speaker system from Klipsch. The width of the front opening is roughly 46 cm. How a horn loudspeaker works. (A) compression driver (B) horn. A horn loudspeaker is a loudspeaker or loudspeaker element which uses an acoustic horn to increase the overall efficiency of the driving element (s).

  6. Audio crossover - Wikipedia

    en.wikipedia.org/wiki/Audio_crossover

    For passive systems, the tweeter is wired with opposite polarity to the woofer; for active crossovers the high-pass filter's output is inverted. In 3-way systems the mid-range driver or filter is inverted. However, this is generally only true when the speakers have a wide response overlap and the acoustic centers are physically aligned.

  7. Line array - Wikipedia

    en.wikipedia.org/wiki/Line_array

    Therefore, each enclosure must be designed to rig together closely to form columns composed of high-, mid- and low-frequency speaker drivers. Increasing the number of drivers in each enclosure increases the frequency range and maximum sound pressure level, while adding additional boxes to the array will also lower the frequency in which the ...

  1. Ads

    related to: mid range speaker